Improvised plastic cover in place |
- The small TT350F can be used as a radio trigger and the larger TT685F used with an umbrella or small soft box.
- The large TT685F can be used to provide a bounced fill light, while the small FF350F can be used as a narrow-beamed key light.
- Both flashes could be used together in a direct key / fill light combination.
Cameras and the protective cover for the Flashpoint were removed to show the general layout |
Be really REALLY careful when you cut! |
Defeating Radio Trigger Delays: There is always a short delay when using radio triggered flashes. As a result, the flash may discharge after the second shutter curtain (a quaint term from when the shutters were made of rubberized fabric) has started to close. When using a focal plane shutter (X-E1), it appears as a dark band across the bottom of the frame. This clipping only occurs when shooting at the maximum flash synchronization speed, or one shorter in duration.
When using the X100 and its "sync at all speeds" leaf shutter, I would normally rely on a neutered flash cable to bypass any unnecessary TTL communication between the flash and the camera. Instead, I could now use the shoe-mounted, TT350F in manual mode and trigger the more powerful TT685F using its built-in optical slave in the manual mode, eliminating the delay. This is done by setting the on-camera TT350F to manual and rotating the head towards the TT695F which has been set to fire using the built-in optical slave.
While this my seem like an overly complicated game plan, I feel comfortable that given a short period of time, I can meet almost any lighting challenge that might come along. But in reality, nearly all of my work is done with a single, on-camera flash and my flash-at-any-speed Fuji X100T, and these two items are instantly accessible. The fun begins when I have an abundance of both time and energy to make a photo I would really be happy with.
When using the X100 and its "sync at all speeds" leaf shutter, I would normally rely on a neutered flash cable to bypass any unnecessary TTL communication between the flash and the camera. Instead, I could now use the shoe-mounted, TT350F in manual mode and trigger the more powerful TT685F using its built-in optical slave in the manual mode, eliminating the delay. This is done by setting the on-camera TT350F to manual and rotating the head towards the TT695F which has been set to fire using the built-in optical slave.
While this my seem like an overly complicated game plan, I feel comfortable that given a short period of time, I can meet almost any lighting challenge that might come along. But in reality, nearly all of my work is done with a single, on-camera flash and my flash-at-any-speed Fuji X100T, and these two items are instantly accessible. The fun begins when I have an abundance of both time and energy to make a photo I would really be happy with.
*When used in the manual mode, the Nissin i40 will deliver a full-power discharge only when the sync speed is 1/250 or slower, based on some simple exposure tests.
No comments:
Post a Comment