The camera had some significant limitations when compared to today's digital wonders:
- Hyperbole aside, the lens was not particularly sharp. As a consequence, I had to use every square millimeter of the negative, since excessive enlargement would reduce the sharpness even further. I also avoided making 8 X 10 prints. As my father used to say, "If you can't make it sharp, make it small".
- The camera had a non-removable, fixed focal length lens. I am convinced that today's digital photographers wouldn't believe such cameras ever existed. This meant that if I wanted a close-up, I simply moved closer.
- Roll Film Could Capture Fewer Images. With only 36 exposures, I was very careful when choosing my subjects. I knew that when I ran "dry", it could take a precious minute to reload and be ready to go, assuming that I could properly align the film with the sprockets before I closed the back. I taped a film can with a second roll of film to the neckstrap, a simple gesture that showed the world that I meant business.
- Advancing the film was a manual operation. Since I knew that it would be a second or two between shots, I tended to wait for that critical moment before pressing the shutter.
Previsualize The Image. I learned to previsualize the finished photograph before I brought the camera into play, I looked directly at my intended subject. Next, I quickly glanced to see if anything in the background would distract from the main subject.
Make Your Adjustments Before Raising The Camera. I made it a point to select my aperture/shutter combination before bringing the camera to bear. I usually select the aperture first, since it will have the greatest impact on the appearance of the finished photograph. Today, I make it point to choose the smallest aperture (yielding the shallowest depth of field) I can get away with.
Bring The Camera To Your Face. Finally, and most importantly, I would bring the camera up to my face without losing sight of the subject. When doing this, I was quite sure that the image I would capture would be exactly what I had seen the moment before. The built-in viewfinder window on the Olympus made it easy.
Compose and Crop In The Viewfinder. Be sure that all of the visual elements are in position before you release the shutter. While you can re-compose and crop in post production, you will find that the more drastic the crop, the more detail you will lose.
I know it would be difficult for me to return to the mechanical, film-based, analog world of the 1970's. But overcoming the limitations of my equipment back then made me a better photographer today. I continue to remind myself that planning my shots is as important today as it was then, although the consequences of a miscalculation are less severe than they used to be.
No comments:
Post a Comment