The Particulars: Knowing that I'd be dealing with direct sunlight somewhere in the photo, I brought my Fuji X-100S with my WCL-X100 Wide Angle Conversion Lens already bolted in place. I had my full Nikon kit ready - all 26 pounds of it. For lighting, I used a Lastolite Ezybox and and Adorama Zoom Li-on flash with its dedicated radio trigger. While researching for this post, I discovered that Adorama has apparently updated the Li-On flashes to enable TTL control, and seem to have abandoned the manual adjustable radio remote. I'm not surprised by this sudden change, but it leaves me to conclude that everything is disposable whenever a newer technology can be infused with little or no cost. Granted, TTL control is being adopted to more and bigger flashes, so these manually controlled units will be considered "quaint" in a few more years. But I digress.
Overall, I'm very happy with the results. But well past the point of a re-shoot, I discovered three errors I would have caught if I had used my Hoodman Loupe, as I've recommended for so many years. Before you continue, can you spot them? If not, let us proceed.
As I mentioned, quickly "chimping" with the Hoodman Loupe would have revealed this hotspot, which I could have eliminated by having my subject step, or lean, forward. Neither Cissie nor I noticed it, admittedly because we were both so pleased with how well the shoot was going.
Now by all accounts, the 24" x 24" Ezy Box is a little small for the application. There's an old rule of thumb that suggest the ideal light-to-subject distance is equal to the diagonal length of the softbox, which in this case is about 34", or about 3'. My actual sight-to-subject was considerably longer (closer to 7'), giving me a slightly harder shadow than I would have liked. Still, there are nice big catchlights, and the skin around the eyes is well-rendered.
Boo-Boo #2: Reflection In The Photograph. If look look at my enlarged sample, you can see the reflection of the softbox in the upper right hand corner of the framed photograph. I was probably overlooked because of its relatively small size and its location at the upper right hand corner of the surrounding mat.
The fix is simple, but obviously forgotten in the moment. By tipping the top edge of the photograph forward, the reflect is re-directed down, in front of the subject, making it invisible to the camera.
Boo-Boo #3: What's With The ISO? Upon returning from a shoot, digital photographers should "zero out" their cameras, which for me means:
- A fresh battery in the camera*,
- A newly formatted card in the slot,
- The exposure counter set to zero,
- An ISO setting of 200,
- A White Balance setting of Cloudy Bright,
- An Auto Focus setting of Single Servo, with the central focusing bracket selected,and
- All lenses, flashes, and accessories back in their places, and all snaps and buckles secured.
- I could have reduced the background brightness by one stop without changing the exposure duration or the aperture size.
- I would have also decreased the flash effectiveness by a factor of one-half. Since I was shooting at full power, I would need to reduce my flash-to-subject distance by about 30%.
- Because the light from a soft boxes has a distinct edge, the subjects at the outer edges my have received less light than they really needed.
To The Good: Finally, something unequivocally positive about the photo. In order to get a better view of the building in the background, I held the camera a foot above eye level, relying on the LCD panel for framing. It was little dark, but the technique gave me the final image at the top of the page. In fact, the top of the camera was actually touching the lower edge of the softbox. This gave a soft, front-on lighting and a flattering, raised chin pose for all of my subjects. Definitely, something to remember when working with mirrorless cameras, or even with Live Preview in my Nikon bodies.
*This switch-up is particularly important for Fuji users, since their batteries are notoriously short-lived. DSLRs give considerably more shots per battery.
No comments:
Post a Comment